AUWA Environmental Technology & Recycling
PAAL GROUP - news
PAAL always offers an economic baling press solution to compact large quantities of various materials - through simple, but intelligent engineering and craftsmanship, the use of only high-quality components and extensive experience. PAAL balers offer the best performance with the lowest cost per ton.
If the throughput is for example, less than 1 t/h or there is a smaller proportion of "difficult" material, which does not justify the investment of an automatic channel baling press, then PAAL can offer the PAC baler now! The baler type PAC is a semi-automatic closed-end baler with a pressing force of 35, 50 and 65 tons. The PAC makes heavy bales according to the requirement of the paper mills - always a width of 1100 mm, a height of 750 mm and a length of 1200 mm. Due to the relatively high pressing force and the closed compact chamber the bales are very heavy, and thus the truck `s are fully loaded. The PAC baler can be fed by hand or with a simple conveyor belt. The bales are tied manually.
PAAL's decades of experience in the production of balers was also used in the design, development and manufacturing of the PAC baler. It is 100% manufactured in the PAAL factory in Osnabrück, Germany. PAAL produces the balers in a modular design ensuring costs are kept to a minimum and the manufacturing lead time is minimal.
In September the PAC is exhibited at the RWM show in Birmingham!<- Back to: communications