Passive HouseA residential building construction standard requiring very low levels of air leakage, very high levels of insulation, and windows with a very low U-factor. Developed in the early 1990s by Bo Adamson and Wolfgang Feist, the standard is now promoted by the Passivhaus Institut in Darmstadt, Germany. To meet the standard, a home must have an infiltration rate no greater than 0.60 AC/H @ 50 pascals, a maximum annual heating energy use of 15 kWh per square meter (4,755 Btu per square foot), a maximum annual cooling energy use of 15 kWh per square meter (1.39 kWh per square foot), and maximum source energy use for all purposes of 120 kWh per square meter (11.1 kWh per square foot). The standard recommends, but does not require, a maximum design heating load of 10 W per square meter and windows with a maximum U-factor of 0.14. The Passivhaus standard was developed for buildings in central and northern Europe; efforts are underway to clarify the best techniques to achieve the standard for buildings in hot climates. Massachusetts will host a day-long symposium at District Hall on October 15 to explore Passive House and high-performance building issues in the region.
The keynote address will be given by Ken Levenson, co-founder of 475 High Performance Building Supply and president of New York Passive House. He'll be discussing the New York Passive House market and how adoption of the building standard can be expanded across the Northeast.
Energy Efficiency & Renewables
Waste Management & Recycling
Sofia Sport & Healthy Life
CleanExBg - Cleaning & Hygiene